TRI-SWIFT Port Orientation

Dominating performance! TRI-SWIFT's patent-pending Multi-Inlets induce greater fluid turbulence (chaotic fluid mixing) at the micro-channels of our copper cold plates to maximize the coefficient of heat transfer. It's not just adding another inlet port, our proprietary wavy jet plate and mixing chamber combines to form a lethal cooling engine. Benchmarks showing 8-15C lower CPU temperatures at the same flow rate (energy) from a water pump against other liquid cooling solutions.

Turbulence (the method of cooling we specialize in) is looked down upon by in the cooling industry because it is perceived as an inefficient manifestation of chaos. The industry shied away from turbulence because chaotic fluid flow was deemed inefficient and hard to control. At FLUIX we flipped the script on chaos, harnessing the power of fluid turbulence where it matters most. At the micro channels of the copper cold plate, inside our proprietary mixing chamber we harness the turbulent fluid behavior to increase the thermal transfer rate by 25%. We validated our technology using thousands of hours of computational fluid dynamics simulations and experiments. Now our technology is being used by the top high performance workstation and server manufacturers in industry verticals such as Architecture, Forensic Computing, Engineering Design, and Gaming.

Turbulent flow is the manifestation of chaos when it comes to fluid flow behavior. Fluid flow can be characterized as Turbulent if there are signs of varying pressure and fluid velocity. An excellent example of Turbulent Flow is the mass exhaust from a rocket engine or the wake in the water from a speed boat passing by.

Turbulent flow, when used properly, is advantageous when it comes to heat transfer as it encourages mixing (fluid particles hitting cold plate fins and exchanging heat rapidly) and transferring heat from CPU to cold plate and finally to the fluid efficiency.

Founded in 2017 by a team of aerospace/thermal engineers and PC & tech enthusiasts dedicated to high quality, performance, and chaos. We are Masters of Chaos, leveraging the chaos of fluid turbulence uniquely, we differentiate ourselves from other boring water cooling manufacturers by being chaotic in our mission to cool the world's most powerful computers. From the core of our technology to our dedicated team, we are Turbulent. “BE TURBULENT”. 

We understand and are working diligently to get orders out as soon as possible. If your order has not shipped within 3 weeks of being placed, please reach out to us at info@fluixpro.com and include your order # in the subject line. Due to global supply chain issues, we might be experience longer than normal fulfillment times. Our team will be happy to assist in getting your order out quickly. 

Every TRI-SWIFT Water Block comes with a brass Y-splitter fitting that can be used to aid in the installation of fittings and tubing to the dual inlets of the block. Although the Y-splitter is not mandatory, it is recommended for the most optimal operation of the block. For the best performance, it is recommended that the outlet tube from the pump goes directly to the Y-splitter fitting then directly into the dual inlets of the TRI-SWIFT block. This ensures that the block received the fastest flow rate for better thermal performance. For more information about "What type of fittings and tubing can I use with the TRI-SWIFT blocks?" Check below.

The TRI-SWIFT Water Block and included brass Y-splitter fitting uses standard G1/4 water cooling ports and thread. Therefore, standard water cooling soft and hard tube fittings will work with our blocks. The tubing ultimately depends on the fittings you are using. Please match the size of the fitting with the right size of tubing. For example, use 10mm ID X 16mm OD fittings only with the same dimensions tubing. 

RMA Procedure

FLUIX will replace Product(s) free of charge if your item has a manufacturing defect that is covered by the warranty. You must send good quality photos or video, where the damage or faulty function is clearly visible/audible. Before sending anything to us, please contact our team at FLUIX by emailing us at info@fluixpro.com Our team will then determine if your problem qualifies for warranty coverage and then you will be notified. You can start the RMA procedure by emailing us at info@fluixpro.com , make sure to include “RMA” and your order number in the subject line. We will only honor RMA requests for orders that have been placed in the last 14 days. Note: Please do not hand deliver your Product(s) to our headquarters, even if local. Our offices are not set up to receive RMA parts. We appreciate your cooperation.

If your order has not shipped, please email us at info@fluixpro.com to be assisted in canceling an order. Our team is happy to help. 

If your order has already shipped, you will need to contact us at info@fluixpro.com and follow an RMA process to proceed with a refund. Check out "How do I request an RMA"? Please note, we will only honor RMA requests for orders that have been placed in the last 14 days.

Yes! A 14-Day Money Back Guarantee (FLUIXPRO.COM Web-store Purchases)

Our goal is for you to be completely satisfied with your purchase from our web-store. If at any time within 14 days of receiving your Product from our online store at www.fluixpro.com, you are not 100% satisfied, you may return the product to us (with respect to the conditions below) for a refund. 

You can return your items within 14 days from purchase if:

1. The product and packaging is unused and in mint condition.
2. The product is undamaged (no signs of installation, or signs of liquid present in the product). 
3. All shipping and restocking costs are covered by the customer. 

Product packages that are opened can be accepted for returns, however, it is up to our discretion if we accept the return depending on if we find the product in proper condition for further sale. Up to 20% restocking fee may be charged. 

Check our Return Policy  in the Returns/Privacy/Warranty tab on our website.